half - size crystal can welded dpdt dry circuit to 2 amps contact arrangement .......................... 2pdt (2 form c) weight ........................................................ 0.25 oz approx. designed to meet the requirements of mil - prf - 39016 . resistive .............. 2 amps @ 28 vdc or 115v 400 hz (case ungr ounded) low level ............................ 10 - 50 a @ 10 - 50 mv dc or peak ac (note 4) life ................................... 100,000 operations minimum @ rated load, 125 o c pull in power ............................................ 250 mw approx. operate/release time .................... 4 ms max, excluding bounce time at nominal coil voltage contact bounce tim e ..................... 2 ms max @ 2 amps 28 vdc contact resistance : before life ....................... 0.050 ohms max @ 2 amps and 6 vdc after life .......................... 0.100 ohms max @ 2 amps and 6 vdc temperature range ............................... - 65 o c to +125 o c vibration (note 2) ................................ 0.4" da 10 - 38 hz 20 g's 38 - 2,000 hz shock (operating) (note 2) ........................ 50 g's 11 ms duty cycle ........................................................ continuous insulation resistance 10,000 megohms @ 500v 25 o c 1,000 megohms @ 500v 125 o c dielectric strength: sea level: contact to case ................................... 1,000 vrms contact to coil ..................................... 1,000 v rms coil to case ............................................ 500 vrms across open contacts ........................... 500 vrms 70,000 feet: all points ................................................. 350 vrms notes 1. for case grounded loads and other ratings, consult the factory. 2. for applications requiring other shock and vibration levels, consult the factor y. 3. for other ratings consult the factory. 4. relay contacts which have switched high level currents are no longer suitable for switching low level loads. br26 s pecifications general performance contact rating (note 1): electrical characteristics environmental 1 www.microsemi.com ? 2015 microsemi corporation april 2015 rev. 3 downloaded from: http:///
---------------------------------------------------------------------- rel ay type -------------------------------------------------- nominal coil resistance --------------------------------------- terminal style -------------------------------- mounting type --------------------- nominal coil voltage br26 - 700 a 1 - 26v model br26 part number br26 - 37()() - 6v br26 - 150()() - 12v br26 - 700()() - 26v nominal coil voltage 6 vdc 12 vdc 26 vdc maximum coil voltage 7.3 vdc 14.8 vdc 32 vdc pull in voltage (max @ +125 o c) 4.4 vdc 8.4 vdc 18 vdc pull in voltage (max) 3 vdc 6 vdc 13 vdc drop out voltage (min) 0.3 vdc 0.6 vdc 1.3 vdc coil resistance 10% @ 25 o c 37 ohms 150 ohms 700 ohms ? unless otherwise specified, all tests made at nominal coil voltages, @ 25 o c. ? for special coil variations, switching configurations, terminals styles and mounting types, consult the factory. ? unless otherwise specified, tolerances on decimal dimensions are .010". ? specifications contained herein are subject to change witho ut notice. coil data sc schematic terminal view terminal styles mounting codes general notes 2 downloaded from: http:///
br26 - 03 / 04.15 microsemi corporate headquarters one enterprise, aliso viejo, ca 92656 usa within the usa : +1 (800) 713-4113 outside the usa : +1 (949) 380-6100 sales : +1 (949) 380-6136 fax : +1 (949) 215-4996 e-mail: sales.support@microsemi.com microsemi corporation (nasdaq: mscc) offers a comprehensive portfolio of semiconductor and system solutions for comm unications, defense & securi ty, aerospace and industrial markets. products include high-performance and radiation-hardened analog mixed-signal integrated circuits, fpgas, socs and asi cs; power management products; timing and synchronization devices and precise time soluti ons, setting the worlds standard for time; voice processing devices; rf solutions; discrete components; security technologies and scalable anti-tamper products; power-over-ethernet ic s and midspans; as well as custom design capabilities and services. microsemi is head quartered in aliso viejo, calif., and has approximately 3,400 employees globally. learn more at www.microsemi.com . ? 201 5 microsemi corporation. all rights reserved. microsemi and the microsemi logo are trademarks of microsemi corporation. all other trademarks and service marks are the property of their respective owners. microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. the products sold hereunder and any other products sold by microsem i have been subject to li mited testing and should not be used in conjunction with missi on-critical equipment or applications. any performance specifications are believed to be reliable but are not verified, and buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any end-products. buyer shall not rely on any data and performance specifications or para meters provided by micr osemi. it is the buyer's responsibility to independently determine suitability of any products and to test and verify the same. the information provided by microsemi hereunder is provi ded "as is, where is" and with all faults, and the entire risk associated with such information is entirely with the buyer. microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other ip rights, whether with regard to such information itself or anything described by such in formation. information provided in this document is proprietary to microsemi, and microsemi reserves the ri ght to make any changes to the information in this document or to any products and services at any time without notice. downloaded from: http:///
|
